WHEELS UK

Fiat Talento
copyright: M 93 License

model: FFL, FJL
year built: 2016-
abe: E2*2007/46*0497*01-06, E2*2007/46*0497*01-07,
Download
bolt circle:
center hole:
thread:
2% limit:
release SCC:
special acceptance:
FA: 114,3/5
FA: 66,1
FA: M14x1,5
FA:
FA:
FA:
BA: 114,3/5
BA: 66,1
BA:
M14x1,5
BA:
BA:
BA:

steel rim:
tightening torque:
alu rim:
tightening torque:
FA: M1415KE28S
FA: 145
FA: M1415KE28S
FA: 145
BA: M1415KE28S
BA: 145
BA: M1415KE28S
BA: 145

wheel spacer system 2

Stick through system with double centering hubcentric
Normally the original wheel mounting elements can still be used up to a thickness of 5mm. For thicknesses above 5mm longer wheel mounting elements are needed which have to be ordered separately. Please check the version of your original bolts (60 Taper- or Radius(Ball) seating, thread- and shank-length).
- all values in mm are per wheel hub
- prices shown are for 1pr (1 axle)
ch rim: 114,3/5
chd: 69,4
 
 
ch rim: 114,3/5
chd: 76,1
 
 

adaption wheel spacer system 2

Hub hole adaption with double centering
Our system for the adaption of the hub hole drilling. Normally the original wheel mounting elements can till be used up to a thickness of 5mm. For thicknesses above 5mm longer wheel mounting elements are needed which have to be ordered separately. Please check the version of your original bolts (Taper- or Radius (Ball)seating, thread- and shank-length).
- all values in mm are per wheel hub
- prices shown are for 1pr (1 axle)
ch rim: 114,3/5
chd: 70,0
 
 
ch rim: 114,3/5
chd: 72,6
 
 
ch rim: 114,3/5
chd: 73,1
 
 

adaption wheel spacer system 2 anodized

Anodized version of our adaption system 2
Anodized spacers and adaptive systems are characterized by an increased resistance against salt and corrosion. Moreover the surface finish gives you an elegant appearance
W = black anodization (surface) / E = silver anodization (surface)
- all values in mm are per wheel hub
- prices shown are for 1pr (1 axle)
ch rim: 114,3/5
chd: 72,6
 
 
ch rim: 114,3/5
chd: 73,1
 
 

adaption wheel spacer system 4

Hub hole and pitch diameter adaption with double centering
In this case the number of holes has to stay the same (e.g. 100/4 to 108/4 or 100/5 to 112/5)! Theadditional for the double screw joint needed wheel mounting elements are included in delivery, the original wheel bolts can still be used. All of our wheel spacers are made of a high-tensile aluminium-magnesium-alloy.
- all values in mm are per wheel hub
- prices shown are for 1pr (1 axle)
ch rim: 112/5
chd: 57,1
thread rim: M14x1,5
 
ch rim: 114,3/5
chd: 66,1
thread rim: M12x1,5